#3단계의 변경 사항
편집자 abramski123-
편집 승인됨 완료자 abramski123
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [title] Removing front cover and showing the srews |
|---|---|
| + | [* black] Now its time to grab a Torckx (star shaped) T6 screwdriver before we continue, because in the next step you will need it. |
| + | [* black] Now its time to remove the front cover, its easy but tricky at the same time, you put the upper side on the table, |
| + | [* black] The charger/usb/headphone side should be facing you, now you need a little bit of force and your finger nails, pull the front cover away from the main unit until you hear a loud click. It should look as showen on the first picture of this step |
| + | [* black] Now all the screws that are holding the unit toghether should now all be visible |
| + | [* black] There should be 2 above the LCD screen, 2 under the LCD screen, and 2 under the keypad, on the bottomside of the phone. |
| + | [* black] Lets go to the next step |
이미지 1
이전 이미지 없음
추가
이미지 2
이전 이미지 없음
추가