iMac Intel 27" EMC 2429 Display Replacement 단계 #2 기록

#2단계의 변경 사항

편집자 Jeff Suovanen- 2018년 5월 29일

편집 승인됨 완료자 Jeff Suovanen

	[* black] Carefully lay the iMac stand-side down on a flat surface.
-	[* icon_note] Due to tight tolerances, you will have to use a thin hooked tool to lift the display out of the outer case. As seen in the first picture, we made one out of a bent paperclip.
-	[* icon_note] Alternatively, our [product\|IF174-002\|Dual Hard Drive Kit] includes a pair of tweezers with an angled tip that are great for this task.
+	[* icon_note] Due to tight tolerances, you will have to use a thin hooked tool to lift the display out of the outer case. As seen in the first picture, we made one out of a bent paperclip. A pair of angled tweezers can also work well.
	[* black] Use a thin hooked tool to lift one side of the top edge of the display by its steel outer frame.
	[* icon_note] After lifting the top edge of the display on one side, hold it out of the outer case while you use a hooked tool to lift the other side.
	[* black] Raise and hold the display high enough to access the cables.
	[* icon_caution] Do not lift the top edge of the display out of the outer case too far, as several short ribbon cables still connect the two components.