주요 콘텐츠로 건너뛰기
도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Use the Phillips #1 screwdriver to remove the two 3.1mm screws from the LED PCB.

Lift the LED PCB up with your fingers and flip it over revealing the ZIF connector.

The LED PCB is still tethered to the daughterboard via a ribbon cable so be sure not to yank it out or it could cause damage to the cable or its connectors.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.