주요 콘텐츠로 건너뛰기

전면 패널 어셈블리 분리

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 15개에 영향을 미칩니다.

4 단계
Front Panel Assembly Removal, Disconnect the display cables: 0 단계, 이미지 3개 중 1개 Front Panel Assembly Removal, Disconnect the display cables: 0 단계, 이미지 3개 중 2개 Front Panel Assembly Removal, Disconnect the display cables: 0 단계, 이미지 3개 중 3개
Disconnect the display cables
  • Use the flat end of a spudger to disconnect the two digitizer cables by lifting straight up on the press connectors.

  • To avoid damaging your iPad, pry only on the connectors themselves, not on the socket on the logic board.

스퍼저의 납작한 끝을 사용하여 프레스 커넥터를 똑바로 들어 올려 다이타이저 케이블 두 개를 연결 해제하세요.

iPad가 손상되지 않도록 로직 보드의 소켓이 아닌 커넥터 자체만 들어 올리세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.