주요 콘텐츠로 건너뛰기

Apple Watch Series 7 배터리 교체

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

7 단계
Apple Watch Series 7 Battery Replacement, Disconnect the battery: 0 단계, 이미지 2개 중 1개 Apple Watch Series 7 Battery Replacement, Disconnect the battery: 0 단계, 이미지 2개 중 2개
Disconnect the battery
  • Use a pair of tweezers to pull the battery cable out of the battery ZIF connector.

  • During reassembly make sure to push the cable all the way back into the ZIF connector before locking the it. Reapply the black tape on top of the connector to secure the battery cable or replace it with new one. Otherwise the battery cable may slip out of the connector and your watch won't turn on.

핀셋을 사용하여 배터리 ZIF 커넥터에서 배터리 케이블을 빼세요.

재조립할 때 커넥터를 잠그기 전에 케이블을 ZIF 커넥터 안으로 끝까지 밀어넣었는지 확인하십시오. 커넥터 상단에 검정색 테이프를 다시 부착하여 배터리 케이블을 고정하거나 새 테이프로 교체하세요. 아니면 배터리 케이블이 커넥터에서 빠져 나와서 시계가 켜지지 않을 수 있습니다.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.