주요 콘텐츠로 건너뛰기

Apple Watch Series 7 배터리 교체

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

1 단계 번역중

1 단계
Apple Watch Series 7 Battery Replacement, Soften the battery adhesive: 0 단계, 이미지 1개 중 1개
Soften the battery adhesive
  • Prepare an iOpener and apply it to the rear side of your Apple Watch for at least two minutes to loosen the adhesive underneath the battery.

  • A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the watch—the display and internal battery are both susceptible to heat damage.

iOpener를 준비하고 Apple Watch 후면에 2분 이상 적용하여 배터리 아랫면의 접착제를 부드럽게 하세요.

헤어 드라이어, 열선총 또는 핫 플레이트를 사용할 수도 있지만 시계를 과열하지 않도록 주의하세요—디스플레이와 내부 배터리는 모두 열 손상에 취약합니다.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.