Testing Power Cord Continuity

영어

한국어

1 단계 번역중

1 단계

Set the multimeter to continuity test mode

Unplug the power cord from the device and from the AC outlet. Failure to do so can result in electrical shock or death.
Set the multimeter to continuity test mode.
The setting is symbolized by a diode or sound wave symbol as seen in the pictures. If the meter is set to the correct mode, you should hear the meter beep when the leads are touched together.
Verify that the positive lead is plugged to the voltmeter/ ohmmeter outlet.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.