Xbox Series X Wireless Controller Daughterboard Replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

안내서로 돌아가기

영어

한국어

1 단계 번역중

1 단계

Xbox Series X Wireless Controller Daughterboard Replacement, Disconnect the antenna cables: 0 단계, 이미지 3개 중 1개

Xbox Series X Wireless Controller Daughterboard Replacement, Disconnect the antenna cables: 0 단계, 이미지 3개 중 2개

Xbox Series X Wireless Controller Daughterboard Replacement, Disconnect the antenna cables: 0 단계, 이미지 3개 중 3개

Disconnect the antenna cables

Slide one arm of a pair of tweezers under the antenna coaxial cable connector, as close to the metal head as possible.
Lift the connector straight up to disconnect it.
Be sure to lift the coaxial connector straight up off of the socket to avoid bending the connector.
Repeat the procedure for the second antenna cable.
During reassembly, align the connector over the socket and use your finger to press it into place. A tool like a spudger can slide off and damage the surface-mounted components around the connector.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.