알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.
1 단계 번역중
1 단계

-
Remove the single black T8 Torx screw from the right side of the upper case.
-
Disconnect the orange ribbon cable that connects underneath the inverter board.
귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.