Skip to main content
도움말
23단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Grab the logic board from both edges and lift it out of the midplane, minding any cables that may get caught.

When reinstalling your logic board, be sure to clean and apply a new layer of thermal paste to the U3 chip (highlighted in red) located on the underside of your logic board as well as its copper heat sink attached to the midplane.

We have a thermal paste guide that makes applying thermal paste a snap.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.