소개

Use this guide to replace the access door on the bottom edge of your iMac.

부품

부품은 필요하지 않습니다.

Lay your iMac face-down on a soft, clean surface as shown. Be sure there isn't any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.
  • Lay your iMac face-down on a soft, clean surface as shown.

  • Be sure there isn't any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.

  • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

  • All three screws will remain captive in the access door.

  • Remove the access door.

Before beginning unplug your iMac.

Henry Barnett - 답글

The screws are not phillips #1 as implied above. My phillips#2 bit fit.

John McWilliams - 답글

Mac RAM 키트
Mac 속도를 높이십시오. 메모리를 최대한 활용하십시오.
Mac RAM 키트
Mac에서 메모리를 더 많이 확보하십시오.
결론

To reassemble your device, follow these instructions in reverse order.

다른 8명이 해당 안내서를 완성하였습니다.

Walter Galan

548,769 평판

안내서 2,823개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 6

지난 30일: 30

전체 시간: 5,669