소개

Remove the glass panel to gain access to your iMac's internals.

  1. The glass panel is fixed onto the front bezel with fourteen magnets around its perimeter.
    • The glass panel is fixed onto the front bezel with fourteen magnets around its perimeter.

    • Stick two suction cups to opposing corners of the glass panel. Small suction cups used to stick things to windows or shower walls work.

    • To attach the suction cups we sell, first position the suction cup with the movable handle parallel to the face of the glass panel. While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle.

    • If your suction cups refuse to stick, try cleaning both the glass panel and the suction cup with a mild solvent.

    댓글 쓰기

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Gently pull the glass panel straight up off the iMac.
    • Gently pull the glass panel straight up off the iMac.

    • The glass panel has several positioning pins around its perimeter. To avoid bending or shearing these pins off the glass panel, be sure to only pull straight up during removal.

    • Be meticulous about cleaning the LCD and the inside face of the glass panel before reinstallation, as any fingerprints or dust trapped inside will be annoyingly visible when the display is on.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 14명이 해당 안내서를 완성하였습니다.

johann beda

회원 가입일: 2010년 09월 13일

2,273 평판

안내서 4개 작성하였습니다

Correct again - thanks to ifixit contributors. Great team

geoff - 답글

댓글 쓰기

조회 통계:

지난 24시간: 2

지난 7일: 8

지난 30일: 55

전체 시간: 25,496