1 단계
이 단계는 번역되지 않았습니다. 번역을 도와주십시오



• The glass panel is fixed onto the front bezel with fourteen magnets around its perimeter.
• Stick two suction cups to opposing corners of the glass panel. Small suction cups used to stick things to windows or shower walls work.
• To attach the suction cups we sell, first position the suction cup with the movable handle parallel to the face of the glass panel. While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle.
• If your suction cups refuse to stick, try cleaning both the glass panel and the suction cup with a mild solvent.
번역하기
댓글 달기
댓글 달기
댓글 쓰기
1024
취소 댓글 달기
2 단계
이 단계는 번역되지 않았습니다. 번역을 도와주십시오

• Gently pull the glass panel straight up off the iMac.
• The glass panel has several positioning pins around its perimeter. To avoid bending or shearing these pins off the glass panel, be sure to only pull straight up during removal.
• Be meticulous about cleaning the LCD and the inside face of the glass panel before reinstallation, as any fingerprints or dust trapped inside will be annoyingly visible when the display is on.
번역하기
댓글 달기
댓글 달기
댓글 쓰기
1024
취소 댓글 달기

작성자

다른 기여자 2명과 함께

johann beda

회원 가입일: 09/13/10

2,483 평판

안내서 4개 작성하였습니다

배지: 22

• 
• 
• 

배지 +19개 더

해당 안내서 넣기

해당 안내서를 사이트/포럼에 작은 위젯으로 포함하려면 크기를 선택하고 아래 코드를 복사하십시오.

미리보기