이 버전에는 잘못된 편집 사항이 있을 수 있습니다. 최신 확인된 스냅샷으로 전환하십시오.
필요한 것
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Remove the four 2.0 mm Phillips screws securing the LCD to the rear case.
-
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Lift the LCD from its long edge closest to the volume buttons and rotate it out of the rear case.
-
Lay the LCD on the front panel as seen in the second picture.
-
거의 끝나갑니다!
결승점