기기를 수리하세요 커뮤니티 상점

iPad 4 CDMA Home Button Control Board Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

소개

Prereq only, new front panel adhesive strips.

필요한 것

  1. iPad 4 CDMA Home Button Control Board Replacement, Home Button Control Board: 1 단계, 이미지 1/2 iPad 4 CDMA Home Button Control Board Replacement, Home Button Control Board: 1 단계, 이미지 2/2
    이 단계에 사용된 도구:
    Tweezers
    $4.99
    구매

    • The two small notched trapezoidal strips will be used to attach the home button bracket to the front panel.

    • Carefully peel off the first trapezoidal adhesive strip with a pair of tweezers.

    • Using a pair of tweezers, place the first trapezoidal adhesive strip (minding its correct orientation) on the matching side of the home button mounting bracket.

    • Make sure to line up the profile of the strip with the edge of the mounting bracket.

    • Repeat the procedure for the second trapezoidal adhesive strip.

    번역하기

  3. iPad 4 CDMA Home Button Control Board Replacement: 2 단계, 이미지 1/1

    • Use a pair of tweezers to grasp the corner of one of the adhesive strips placed on the mounting bracket.

    • Lift and peel the clear backing up off the adhesive strip, revealing the black adhesive strip.

    • Repeat the procedure for the secondary adhesive strip.

    번역하기

  4. iPad 4 CDMA Home Button Control Board Replacement: 3 단계, 이미지 1/2 iPad 4 CDMA Home Button Control Board Replacement: 3 단계, 이미지 2/2

    • Gently place the home button mounting bracket on top of the home button.

    • Make sure the home button mounting bracket is lined up with the bottom of the digitizer.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Walter Galan

694,877 평판

안내서 1,203개 작성하였습니다

배지: 54

배지 +51개 더

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 8

전체 시간: 183