주요 콘텐츠로 건너뛰기

소개

Internal prerequisite.

부품

지정된 부품이 없습니다.

  1. Use the edge of a plastic opening tool to pry the earpiece speaker off the adhesive securing it to the outer case. Note that the power button cable is glued to the the case as well, and will need to be pried up. Use a pair of tweezers to unfold the earpiece speaker from its recess in the outer case.
    • Use the edge of a plastic opening tool to pry the earpiece speaker off the adhesive securing it to the outer case. Note that the power button cable is glued to the the case as well, and will need to be pried up.

    • Use a pair of tweezers to unfold the earpiece speaker from its recess in the outer case.

    • Be careful not to tear the cable from the earpiece speaker. They are adhered together, and the cable is very delicate.

  2. Use the edge of plastic opening tool to  gently move the top sensor assembly away from the outer case. Gently pry the top sensor assembly off the outer case.
    • Use the edge of plastic opening tool to gently move the top sensor assembly away from the outer case.

    • Gently pry the top sensor assembly off the outer case.

  3. Lift and remove the power and sensor cable assembly from the iPhone. Be sure not to lose the small retainer clip located on the top sensor assembly. Be sure not to lose the small retainer clip located on the top sensor assembly.
    • Lift and remove the power and sensor cable assembly from the iPhone.

    • Be sure not to lose the small retainer clip located on the top sensor assembly.

결론

To reassemble your device, follow these instructions in reverse order.

Walter Galan

606,277 평판

안내서 1,203개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 789