물건을 수리하세요 커뮤니티 상점

iRobot Roomba Essential Robot Bumper Replacement

소개

If your iRobot Roomba Essential Robot is bumping into objects or missing areas while cleaning, the bumper may need to be replaced and the sensors may need to be cleaned. This guide will walk you through removing the bumper and cleaning the sensors, a straightforward process you can do at home using basic tools. Over time, dust and debris can accumulate on the sensors, causing navigation issues and reducing cleaning efficiency. Replacing the bumper and cleaning the sensors will help restore your robot vacuum's ability to navigate accurately.

Symptoms:

  • Robot frequently bumps into objects
  • Missed areas during cleaning

For more information on diagnosing sensor or bumper issues, visit our troubleshooting page.

필요한 것

  1. iRobot Roomba Essential Robot Bumper Replacement, Bumper: 1 단계, 이미지 3개 중 1개 iRobot Roomba Essential Robot Bumper Replacement, Bumper: 1 단계, 이미지 3개 중 2개 iRobot Roomba Essential Robot Bumper Replacement, Bumper: 1 단계, 이미지 3개 중 3개

    • Remove the six screws from the thin edge on the backside of the Roomba using a Phillips #00 screwdriver.

    편집

  3. iRobot Roomba Essential Robot Bumper Replacement: 2 단계, 이미지 1개 중 1개

    • Separate the bumper from the Roomba.

    편집

  4. iRobot Roomba Essential Robot Bumper Replacement: 3 단계, 이미지 2개 중 1개 iRobot Roomba Essential Robot Bumper Replacement: 3 단계, 이미지 2개 중 2개

    • Place your fingers against the white tabs on the side of the Roomba and remove the bumper.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

4다른 기여자 명과 함께

hannah neuendorf

회원 가입일: 09/04/24

422 평판

안내서 3개를 작성함

배지: 5

배지 +2개 더

팀

Utah Tech University, Team 1-7, Crenshaw Fall 2024 Utah Tech University, Team 1-7, Crenshaw Fall 2024 회원

UTAHTECH-CRENSHAW-F24S1G7

3 회원들

안내서 4개를 작성함

0가이드 댓글

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 13

지난 30일: 25

전체 시간: 279