주요 콘텐츠로 건너뛰기

Reemplazo del joystick derecho del Nintendo Switch

영어
스페인어
5 단계
Right Joy-Con Joystick Replacement, Remove the battery: 0 단계, 이미지 3개 중 1개 Right Joy-Con Joystick Replacement, Remove the battery: 0 단계, 이미지 3개 중 2개 Right Joy-Con Joystick Replacement, Remove the battery: 0 단계, 이미지 3개 중 3개
Remove the battery
  • The following two steps show the removal of the battery and the coaxial antenna cable from the midframe. These two steps make for a less cluttered repair, but are not essential. If you want, you can leave the battery and the grey coax cable in place here and proceed to step 7.

  • Insert an opening pick between the battery and the Joy-Con housing. Gently pry out the battery, which is lightly taped in place.

  • Be careful not to deform or puncture the battery—it can catch fire or explode if damaged.

Los siguientes dos pasos muestran la extracción de la batería y el cable coaxial de la antena del marco medio. Estos dos pasos permiten una reparación menos desordenada, pero no son esenciales. Si quieres, puedes dejar la batería y el cable coaxial gris en su lugar aquí y proceder al paso 7.

Inserta una púa de apertura entre la batería y la carcasa del Joy-Con. Suavemente saca la batería, que está ligeramente pegada con cinta adhesiva en su lugar.

Ten cuidado de no deformar o perforar la batería, ya que puede incendiarse o explotar si se daña.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.