물건을 수리하세요 커뮤니티 상점

MacBook Pro 13" Touch Bar eind 2016 Vervanging van de logic board-module

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

안내서로 돌아가기
영어
네덜란드어
37 단계
MacBook Pro 13" Touch Bar Late 2016 Logic Board Assembly Replacement, Disconnect the antennas: 0 단계, 이미지 3개 중 1개 MacBook Pro 13" Touch Bar Late 2016 Logic Board Assembly Replacement, Disconnect the antennas: 0 단계, 이미지 3개 중 2개 MacBook Pro 13" Touch Bar Late 2016 Logic Board Assembly Replacement, Disconnect the antennas: 0 단계, 이미지 3개 중 3개
Disconnect the antennas

  • Disconnect the first antenna cable by prying it straight up from its socket.

  • Carefully slide your tweezers or the flat end of your spudger underneath the cable until it's near the socket, and then gently twist or pry up to disconnect it.

Ontkoppel de antennes

Ontkoppel de eerste antenne door deze recht omhoog uit het contact te duwen.

Schuif voorzichtig je pincet of het platte eind van de spudger onder de kabel totdat deze dichtbij het contact is en kantel deze dan rustig om het los te krijgen.

[title] Disconnect the antennas
[* black] Disconnect the first antenna cable by prying it straight up from its socket.
- [* black] Carefully slide your tweezers or the flat end of your spudger underneath the cable until it's near the socket, and then gently twist or pry up to disconnect it.
+ [* black] Carefully slide your [product|IF145-020|tweezers] or the flat end of your spudger underneath the cable until it's near the socket, and then gently twist or pry up to disconnect it.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.