물건을 수리하세요 커뮤니티 상점

MacBook Pro 13" Touch Bar eind 2016 Vervanging van de logic board-module

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

안내서로 돌아가기
영어
네덜란드어
40 단계
MacBook Pro 13" Touch Bar Late 2016 Logic Board Assembly Replacement, Unscrew the logic board: 0 단계, 이미지 2개 중 1개 MacBook Pro 13" Touch Bar Late 2016 Logic Board Assembly Replacement, Unscrew the logic board: 0 단계, 이미지 2개 중 2개
Unscrew the logic board

  • Remove all ten screws securing the logic board assembly:

  • Three 2.5 mm Torx T3 screws

  • Five 2.9 mm Torx T5 screws

  • Two 3.0 mm Torx T5 screws

  • During reassembly, install these screws loosely and adjust the logic board's position if necessary before tightening the screws.

Schroef het logic board los

Verwijder alle tien schroeven die de logic board module vast houden:

Drie 2.5 mm Torx T3 schroeven

Vijf 2.9 mm Torx T5 schroeven

Twee 3.0 mm Torx T5 schroeven

Zorg dat je, bij het weer in elkaar zetten, alle schroeven eerst losjes bevestigt, dan het logic board op de juiste plaats bevestigt en dan pas de schroeven vast draait.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.