주요 콘텐츠로 건너뛰기

Reemplazo de la placa de circuito del controlador de GameCube de Nintendo

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 6개에 영향을 미칩니다.

영어
스페인어

2 단계 번역중

2 단계
Nintendo GameCube Controller Circuit Board Replacement: 0 단계, 이미지 1개 중 1개
  • Lift the circuit board out of the controller.

  • Do not grab the rumble motor to lift the circuit board as shown in the picture. It will in many cases just remove the rumble motor. Instead, grab the edges of the board.

Levanta la placa de circuito para sacarla del controlador.

No agarres el motor vibratorio para levantar la placa de circuito como se muestra en la imagen. En muchos casos, simplemente quitarás el motor de vibración. En su lugar, agarra los bordes del tablero.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.