주요 콘텐츠로 건너뛰기

Reemplazo de la batería de la MacBook Pro 13" 2018

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

영어
스페인어
10 단계
MacBook Pro 13" Touch Bar 2018 Battery Replacement, Separate the outside right battery cell: 0 단계, 이미지 3개 중 1개 MacBook Pro 13" Touch Bar 2018 Battery Replacement, Separate the outside right battery cell: 0 단계, 이미지 3개 중 2개 MacBook Pro 13" Touch Bar 2018 Battery Replacement, Separate the outside right battery cell: 0 단계, 이미지 3개 중 3개
Separate the outside right battery cell
  • After a couple minutes, insert one corner of a plastic card underneath the far right battery cell, starting from the front edge.

  • This shouldn't require much force. If you have trouble, apply more adhesive remover and give it 2-3 additional minutes to penetrate.

  • Try not to deform the battery. A damaged battery can leak dangerous chemicals and/or catch fire.

  • Wiggle the card from side to side and slide it all the way under the battery cell.

  • Lift to fully separate the adhesive, but don't try to remove the battery cell yet.

  • Leave the plastic card temporarily underneath the cell to prevent it from re-adhering while you continue.

Después de un par de minutos, inserta una esquina de una tarjeta de plástico debajo de la pila de la derecha, empezando por el borde frontal.

Esto no debería requerir mucha fuerza. Si tienes problemas, aplica más removedor de adhesivo y dale 2-3 minutos adicionales para penetrar.

Intenta no deformar la batería. Una batería dañada puede desprender sustancias químicas peligrosas y/o incendiarse.

Mueve la tarjeta de un lado a otro y deslízala completamente bajo la batería.

Levántala para separar completamente el adhesivo, pero no intente quitar la pila todavía.

Deja la tarjeta plástica temporalmente debajo de la celda para evitar que se vuelva a adherir mientras continúas.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.