주요 콘텐츠로 건너뛰기

Sostituzione batteria MacBook Pro 13" Touch Bar 2018

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

영어
이탈리아어
10 단계
MacBook Pro 13" Touch Bar 2018 Battery Replacement, Separate the outside right battery cell: 0 단계, 이미지 3개 중 1개 MacBook Pro 13" Touch Bar 2018 Battery Replacement, Separate the outside right battery cell: 0 단계, 이미지 3개 중 2개 MacBook Pro 13" Touch Bar 2018 Battery Replacement, Separate the outside right battery cell: 0 단계, 이미지 3개 중 3개
Separate the outside right battery cell
  • After a couple minutes, insert one corner of a plastic card underneath the far right battery cell, starting from the front edge.

  • This shouldn't require much force. If you have trouble, apply more adhesive remover and give it 2-3 additional minutes to penetrate.

  • Try not to deform the battery. A damaged battery can leak dangerous chemicals and/or catch fire.

  • Wiggle the card from side to side and slide it all the way under the battery cell.

  • Lift to fully separate the adhesive, but don't try to remove the battery cell yet.

  • Leave the plastic card temporarily underneath the cell to prevent it from re-adhering while you continue.

Dopo un paio di minuti, inserisci un angolo di una scheda di plastica sotto la cella della batteria più a destra, iniziando dal bordo anteriore.

Questa operazione non dovrebbe richiedere molta forza. Se incontri dei problemi, applica altro antiadesivo e aspetta 2-3 minuti prima di riprovare.

Cerca di non deformare la batteria. Una batteria danneggiata può rilasciare sostanze chimiche pericolose e/o incendiarsi.

Fai oscillare la scheda da un lato all'altro e falla scorrere completamente sotto la cella della batteria.

Solleva la cella per separare completamente l'adesivo, ma non cercare di rimuovere del tutto la cella già ora.

Lascia temporaneamente la scheda di plastica sotto la cella della batteria per evitare che la colla possa riattaccarsi.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.