주요 콘텐츠로 건너뛰기

여는 절차 및 배터리 분리하기

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 17 안내서에 영향을 미칩니다.

9 단계
Opening Procedure and Battery Disconnect: 0 단계, 이미지 1개 중 1개
  • Reheat your iOpener and apply it to the left edge of the Surface's screen for two minutes.

  • You may need to reheat and reapply the iOpener several times to get the tablet warm enough. Follow the iOpener instructions to avoid overheating.

  • A hair dryer or heat gun may also be used for more heat, but be careful not to overheat the Surface—the screen and internal battery are susceptible to heat damage.

iOpener를 다시 가열하고 Surface 스크린 왼편 가장자리에 2분 동안 적용하세요.

태블릿을 충분히 따뜻하게 하려면 iOpener를 여러 번 재가열하고 다시 적용해야 할 수 있습니다. 과열을 방지하려면 iOpener 지침을 따르세요.

더 많은 열이 필요하면 헤어 드라이어 또는 열선 총을 사용할 수도 있지만 Surface를 과열하지 않도록 주의하세요—스크린과 내부 배터리는 열 손상에 취약합니다.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.