주요 콘텐츠로 건너뛰기

여는 절차 및 배터리 분리하기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 17개에 영향을 미칩니다.

8 단계
Opening Procedure and Battery Disconnect: 0 단계, 이미지 3개 중 1개 Opening Procedure and Battery Disconnect: 0 단계, 이미지 3개 중 2개 Opening Procedure and Battery Disconnect: 0 단계, 이미지 3개 중 3개
  • Insert a new opening pick into the bottom right corner and slide it around the corner toward the bottom edge.

  • Don't insert the opening pick any deeper than the black bezel on the side of the screen. Inserting the pick too far may damage the LCD.

  • Slide the pick along the bottom edge of the Surface to cut through the screen adhesive.

  • Leave this pick in the bottom edge to prevent the adhesive from resealing.

새 여는 픽을 하단 오른편 모서리에 끼우고 하단 가장자리를 향해서 모서리를 따라 미세요

여는 픽을 스크린 측면의 검정색 베젤보다 깊게 끼우지 마세요. 픽을 너무 깊이 끼우면 LCD를 손상할 수 있습니다.

Surface 하단 가장자리를 따라 픽을 밀어서 스크린 접착제를 자르세요.

접착제가 다시 붙는 것을 방지하기 위해서 이 픽을 하단 가장자리에 그대로 두세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.