물건을 수리하세요 커뮤니티 상점

三星盖乐世 S20 Ultra 电池更换

안내서로 돌아가기
영어
중국어
2 단계
Samsung Galaxy S20 Ultra Battery Replacement, Lift the battery from its adhesive: 0 단계, 이미지 2개 중 1개 Samsung Galaxy S20 Ultra Battery Replacement, Lift the battery from its adhesive: 0 단계, 이미지 2개 중 2개
Lift the battery from its adhesive

  • Apply a suction handle to the center of the battery.

  • Brace the top and bottom of the device against your work surface with one hand and firmly pull up on the suction handle with the other.

  • The adhesive takes time and repeated pulls rather than strong force to loosen. Pull on the suction cup with steady force for 15 seconds at a time.

  • If the battery doesn't loosen after multiple attempts, apply 1-2 drops of isopropyl alcohol along the top, left, and right edges, wait a minute, and pull again.

  • Continue lifting until the battery separates from the phone.

将电池从粘合剂中提起来

将吸盘放在电池中心。

用一只手将设备的顶部和底部支撑在工作表面上，用另一只手稳固地向上拉起吸盘手柄。

在执行此操作的前几次，电池很可能不会出现明显的松动。你将需要重复涂抹酒精的过程，等待几分钟，然后用吸柄拉动五到六次以逐渐软化粘合剂。

一旦发现电池开始从设备中提起，请继续执行下一步。

[title] Lift the battery from its adhesive
[* black] Apply a suction handle to the center of the battery.
[* black] Brace the top and bottom of the device against your work surface with one hand and firmly pull up on the suction handle with the other.
- [* icon_note] The battery will not budge the first time you do this. Repeat the process (add alcohol, wait 2-3 minutes, and pull with the suction handle) five or six times to gradually release the adhesive.
+ [* black] The adhesive takes time and repeated pulls rather than strong force to loosen. Pull on the suction cup with steady force for 15 seconds at a time.
+ [* black] If the battery doesn't loosen after multiple attempts, apply 1-2 drops of isopropyl alcohol along the top, left, and right edges, wait a minute, and pull again.
[* black] Continue lifting until the battery separates from the phone.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.