주요 콘텐츠로 건너뛰기

三星盖乐世 S20 Ultra 电池更换

영어
중국어

안내서 정보

= 완료 = 미완료
    This guide shows how to remove and replace the battery for the Samsung Galaxy S20 Ultra.
    The battery is held in place with strong adhesive. High concentration (over 90%) isopropyl alcohol is necessary to loosen and release this adhesive.
    '''***If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]] and do not heat your phone.'''***
    '''***For your safety, discharge your battery below 25% before disassembling your phone.'''*** This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair.
    You'll need replacement adhesive in order to complete this repair.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''***To reassemble your device, follow the above steps in reverse order.'''***
      After completing Follow ++[guide|152044|this guide|new_window=true]++ to perform a battery cycle reset, and ++[[Battery Calibration|calibrate your newly-installed battery|new_window=true]]++.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Check out our [link|https://www.ifixit.com/Answers/Device/Samsung%20Galaxy%20S20%20Ultra|Answers community] for troubleshooting help.

      안내서 단계

      1 단계 — 涂抹高浓度酒精

      在框架和电池边缘之间的间隙中使用高浓度(超过90%)的异丙醇。

      2 단계 — 将电池从粘合剂中提起来

      将吸盘放在电池中心。

      3 단계 — 移除电池

      移除电池。

      귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.