주요 콘텐츠로 건너뛰기

Samsung Galaxy Note10+ 스크린 교체

4 단계
Samsung Galaxy Note10+ Screen Replacement, Slice the left side adhesive: 0 단계, 이미지 3개 중 1개 Samsung Galaxy Note10+ Screen Replacement, Slice the left side adhesive: 0 단계, 이미지 3개 중 2개 Samsung Galaxy Note10+ Screen Replacement, Slice the left side adhesive: 0 단계, 이미지 3개 중 3개
Slice the left side adhesive
  • Apply a suction cup to the heated edge of the display, as close to the edge as possible.

  • If your screen is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken display.

  • Pull up on the suction cup with strong, steady force to create a gap between the display and the frame.

  • Depending on the age of your phone, this may be difficult. If you are having trouble, apply more heat to the edge and try again.

  • Insert the point of an opening pick into the gap.

흡입 컵을 가열한 디스플레이 가장자리에 가능한 한 가깝게 부착하세요.

스크린이 심하게 깨진 경우 투명한 포장 테이프로 디스플레이를 덮으면 흡입 컵을 부착할 수 있습니다. 대안으로, 흡입 컵 대신 매우 강한 테이프를 사용할 수 있습니다. 다른 모든 방법이 실패하면, 흡입 컵을 깨진 패널에 강력 접착 하세요.

강하고 일정한 힘으로 흡입 컵을 당겨서 디스플레이와 프레임 사이에 틈을 만드세요.

휴대폰 버전에 따라서 틈 만들기가 어려울 수 있습니다. 틈을 만드는 데 문제가 있다면, 가장자리에 더 많은 열을 가하고 다시 시도하세요.

여는 픽의 뾰족한 끝을 틈에 넣으세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.