주요 콘텐츠로 건너뛰기

Samsung Galaxy Note20 후면 커버 교체

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 12 안내서에 영향을 미칩니다.

4 단계
Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: 0 단계, 이미지 3개 중 1개 Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: 0 단계, 이미지 3개 중 2개 Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: 0 단계, 이미지 3개 중 3개
Cut along the perimeter of the rear cover
  • Repeat the process of heating and cutting the adhesive along the three remaining sides of the rear cover.

  • You can insert each new opening pick in the gaps created by the opening picks left in each corner.

  • As you proceed, leave an opening pick in each corner to prevent the adhesive from re-sealing.

  • If the rear cover is still attached to the frame after cutting through all four sides, try slicing through the adhesive again with an opening pick.

후면 커버의 나머지 세 가장자리에 가열 및 절단 절차를 반복하세요.

각 모서리에 남겨 둔 픽이 만든 틈으로 새 여는 픽을 끼우세요.

다음 단계로 진행할 때, 접착제가 다시 붙지 않도록 각 모서리에 여는 픽을 남겨 두세요.

네 가장자리를 자른 후에도 후면 커버가 프레임에 여전히 연결되어 있으면, 여는 픽으로 접착제를 다시 자르세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.