물건을 수리하세요 커뮤니티 상점

Démontage de la manette sans fil Xbox One Elite Series 2

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

안내서로 돌아가기
영어
프랑스어
7 단계
Xbox One Elite Wireless Controller Series 2 Disassembly, Removing the Motherboard: 0 단계, 이미지 2개 중 1개 Xbox One Elite Wireless Controller Series 2 Disassembly, Removing the Motherboard: 0 단계, 이미지 2개 중 2개
Removing the Motherboard

  • Begin removing the motherboard by sliding it up along the pins (as noted in the picture). The left side will need to be lifted off of its pin and the board rotated counter-clockwise at a slight angle before it will be able to slide the remaining distance off of the right (longer) pin.

  • The triggers will flex up a bit which allows a little extra room for the board. As with everything else in this disassembly, use caution and patience to prevent damage to any of the components.

  • Once the motherboard has been removed, you may have already noticed the headphone jack has moved or fallen. If it hasn't remove it from the board now.

Retirez la carte mère

Commencez à retirer la carte mère en la glissant le long des picots (comme signalés sur la photo). Le côté gauche doit être soulevé de son picot et le circuit tourné dans le sens inverse des aiguilles d'une montre à un angle léger avant de pouvoir passer sur le côté droit.

Les gâchettes se plieront légèrement pour donner plus de place au circuit. Comme pour tout le reste pendant le démontage, soyez patient et prudent pour éviter d'endommager les composants.

Une fois la carte mère retirée, vous remarquerez que le port jack a bougé ou qu'il est tombé. Si ce n'est pas le cas, retirez-le ce la carte mère.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.