물건을 수리하세요 커뮤니티 상점

Démontage de la manette sans fil Xbox One Elite Series 2

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

안내서로 돌아가기
영어
프랑스어
8 단계
Xbox One Elite Wireless Controller Series 2 Disassembly, Removing the Bumper Bar: 0 단계, 이미지 3개 중 1개 Xbox One Elite Wireless Controller Series 2 Disassembly, Removing the Bumper Bar: 0 단계, 이미지 3개 중 2개 Xbox One Elite Wireless Controller Series 2 Disassembly, Removing the Bumper Bar: 0 단계, 이미지 3개 중 3개
Removing the Bumper Bar

  • There are two tabs holding the retainer for the bar in place. Gently pop these toward you with a spudger and they'll slide up from their own tension. Note: the retainer will likely stay attached to the bumper assembly, but must be removed from the main controller assembly before proceeding to the next step.

  • Once the retainer has been released, again use the spudger to gently pry the buttons outward and upward (in the direction of the arrow in the image) which will release them from another clip. Do this on both sides.

  • As user Shane Muir has pointed out, please be careful due to the fragility of the retainer in this step. It can easily be broken.

Retirez les boutons gâchettes

Il y a deux languettes qui maintiennent les gâchettes en place. Faites les sauter délicatement vers vous avec une spatule et ils glisseront d'eux-mêmes. NB: le lien restera sûrement attaché à l'ensemble des gâchettes mais il doit être enlevé de ce qui reste de la manette pour la prochaine étape.

Une fois que le lien a été enlevé, utilisez de nouveau la spatule pour soulever les boutons vers l'extérieur (dans la direction indiquée par la flèche sur la photo) ce qui les libérera d'un autre clip. Faites cela des deux côtés.

Comme l'utilisateur Shane Muir l'a fait remarqué, faites attention à cette étape, le lien est fragile est peut facilement casser.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.