물건을 수리하세요 커뮤니티 상점

Démontage de la manette sans fil Xbox One Elite Series 2

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

안내서로 돌아가기
영어
프랑스어
이전 단계

9 단계 번역중

9 단계
Xbox One Elite Wireless Controller Series 2 Disassembly, Removing the Daughterboard: 0 단계, 이미지 2개 중 1개 Xbox One Elite Wireless Controller Series 2 Disassembly, Removing the Daughterboard: 0 단계, 이미지 2개 중 2개
Removing the Daughterboard

  • Remove the four T-6 screws holding the daughterboard to the controller frame. Keep in mind this board holds all of the remaining buttons in place, so be careful none of them are lost when removing this.

  • Note: All of the buttons have clips surrounding them that prevent any of the buttons from being installed in the wrong place; be sure not to force any of them into a different location when reassembling the device.

  • When reassembling, do not force anything into place as this could indicate something has been installed improperly.

  • That's it! Hopefully this guide allowed you to access any components that need replacing.

Retirez la carte fille

Retirez les quatre vis T-6 qui maintiennent la carte fille au châssis de la manette. Gardez en tête que cette carte maintient en place l'ensemble des boutons encore présents, soyez prudent de ne pas en perdre en la retirant.

NB: tous les boutons sont équipés de clips qui empêchent de les installer au mauvais endroit; ne forcez pas pour les remettre au moment de remonter l'appareil.

Au moment de remonter l'appareil, ne forcez pas, cela pourrait indiquer que quelque chose a été mal installé.

Ça y est! J'espère que ce guide vous aura permis d'accéder au composant à remplacer.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.