주요 콘텐츠로 건너뛰기

Cómo abrir el iPhone SE 2022 para reparaciones

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 13개에 영향을 미칩니다.

영어
스페인어
4 단계
How to open the iPhone SE 2022 for repairs: 0 단계, 이미지 3개 중 1개 How to open the iPhone SE 2022 for repairs: 0 단계, 이미지 3개 중 2개 How to open the iPhone SE 2022 for repairs: 0 단계, 이미지 3개 중 3개
  • Heat an iOpener and thread it through the arms of the Anti-Clamp.

  • You can also use a hair dryer, heat gun, or hot plate—but extreme heat can damage the display and/or internal battery, so proceed with care.

  • Fold the iOpener so it lays on the bottom edge of the iPhone.

  • Wait one minute to give the adhesive a chance to release and present an opening gap.

  • Insert an opening pick under the screen's plastic bezel, not the screen itself.

  • If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn.

  • Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next two steps.

Calienta un iOpener y pásalo por los brazos del Anti-Clamp.

También puedes utilizar un secador de pelo, una pistola de calor o una plancha caliente, pero el calor extremo puede dañar la pantalla y/o la batería interna, así que procede con cuidado.

Dobla el iOpener de forma que quede sobre el borde inferior del iPhone.

Espera un minuto para que el adhesivo se despegue y se abra el hueco.

Inserta una púa de apertura en el hueco que hay debajo de la pantalla y el bisel de plástico, no en la propia pantalla.

Si el Anti-Clamp no crea un espacio suficiente, aplica más calor al área y gira la manija en el sentido de las agujas del reloj media vuelta.

No des más de media vuelta a la vez y espera un minuto entre vueltas. Deja que el Anti-Clamp y el tiempo hagan el trabajo por ti.

Omite los siguientes tres pasos.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.