주요 콘텐츠로 건너뛰기

Come aprire l'iPhone SE 2022 per le riparazioni

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 13개에 영향을 미칩니다.

영어
이탈리아어
4 단계
How to open the iPhone SE 2022 for repairs: 0 단계, 이미지 3개 중 1개 How to open the iPhone SE 2022 for repairs: 0 단계, 이미지 3개 중 2개 How to open the iPhone SE 2022 for repairs: 0 단계, 이미지 3개 중 3개
  • Heat an iOpener and thread it through the arms of the Anti-Clamp.

  • You can also use a hair dryer, heat gun, or hot plate—but extreme heat can damage the display and/or internal battery, so proceed with care.

  • Fold the iOpener so it lays on the bottom edge of the iPhone.

  • Wait one minute to give the adhesive a chance to release and present an opening gap.

  • Insert an opening pick under the screen's plastic bezel, not the screen itself.

  • If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn.

  • Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next two steps.

Scalda un iOpener e fallo passare tra i bracci dell'Anti-Clamp.

Puoi anche usare un asciugacapelli, una pistola termica o una piastra termica, ma il calore eccessivo può danneggiare lo schermo o la batteria interna, quindi prcedi con attenzione.

Piega l'iOpener così che sia appoggiato sul bordo inferiore dell'iPhone.

Attendi un minuto per dare all'adesivo la possibilità di staccarsi e creare una fessura d'apertura.

Inserisci un plettro di apertura sotto la scocca di plastica dello schermo, non solo sotto lo schermo.

Se l'Anti-Clamp non dovesse creare un'apertura sufficiente, applica più calore all'area e ruota la manopola in senso orario di un quarto di giro.

Non girare più di un quarto di giro per volta, e aspetta un minuto tra un giro e un altro. Lascia che l'Anti-Clamp e il tempo facciano il lavoro per te.

Salta i prossimi due passaggi.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.