주요 콘텐츠로 건너뛰기

MacBook Air 2022 (M2) Screen Replacement

17 단계
MacBook Air 2022 (M2) Screen Replacement, Check for a lid‑angle sensor: 0 단계, 이미지 3개 중 1개 MacBook Air 2022 (M2) Screen Replacement, Check for a lid‑angle sensor: 0 단계, 이미지 3개 중 2개 MacBook Air 2022 (M2) Screen Replacement, Check for a lid‑angle sensor: 0 단계, 이미지 3개 중 3개
Check for a lid‑angle sensor
  • Check if your replacement screen has a lid‑angle sensor installed on the hinge. If it does, skip this step. Otherwise, follow this step to remove the sensor—you'll need to transfer it to your replacement screen.

  • Use the point of a spudger to lift the flap covering the lid‑angle sensor screw, located on the left hinge.

  • Use a 1IP Torx Plus driver to remove the screw securing the lid‑angle sensor.

  • Remove the lid‑angle sensor and set it aside for reassembly.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.