물건을 수리하세요 커뮤니티 상점

Reemplazo de pantalla de Google Pixel 8 Pro

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 14개에 영향을 미칩니다.

안내서로 돌아가기
영어
스페인어
4 단계
Google Pixel 8 Pro Screen Replacement, Secure the Anti-Clamp: 0 단계, 이미지 3개 중 1개 Google Pixel 8 Pro Screen Replacement, Secure the Anti-Clamp: 0 단계, 이미지 3개 중 2개 Google Pixel 8 Pro Screen Replacement, Secure the Anti-Clamp: 0 단계, 이미지 3개 중 3개
Secure the Anti-Clamp

  • The next three steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down three steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • Pull the blue handle backwards to unlock the Anti-Clamp's arms.

  • Place your phone screen side up on an object so it will rest level between the Anti-Clamp's arms—the bottom edge should be hanging off.

  • Slide the arms over the left edge of your phone, so you have access to the bottom edge.

  • Position the suction cups as close to the center of the bottom edge as possible.

  • Squeeze the cups together to create suction.

Asegura el Anti-Clamp

Los siguientes tres pasos demuestran el Anti-Clamp, unas herramienta que diseñamos para hacer el proceso de apertura más sencillo. Si no estas usando el Anti-Clamp, salta tres pasos para un método alternativo.

Para instrucciones completas en como usar el Anti-Clamp, revisa esta guía.

Jala el mango azul hacia atrás para desbloquear los brazos del Anti-Clamp.

Coloca la pantalla de tu teléfono hacia arriba, para que repose al nivel de los brazos del Anti-Clamp—el borde inferior debería colgar.

Desliza los brazos sobre el borde izquierdo de tu teléfono, para que tengas acceso al borde inferior.

Coloca las ventosas de succión tan cerca al centro del borde inferior como sea posible.

Aprieta ambas ventosas para crear succión.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.