물건을 수리하세요 커뮤니티 상점

Remplacement de la batterie du MacBook Air 11" Mi 2013

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 12개에 영향을 미칩니다.

안내서로 돌아가기
영어
프랑스어
이전 단계

2 단계 번역중

2 단계
MacBook Air 11" Mid 2013 Battery Replacement: 0 단계, 이미지 1개 중 1개

  • When handling the battery, avoid squeezing or touching the six exposed lithium polymer cells.

  • Lift the battery from its edge nearest the logic board and remove it from the upper case.

  • If you're installing a new battery, you should calibrate it after installation:

  • Charge it to 100%, and then keep charging it for at least 2 more hours. Next, unplug and use it normally to drain the battery. When you see the low battery warning, save your work, and keep your laptop on until it goes to sleep due to low battery. Wait at least 5 hours, then charge your laptop uninterrupted to 100%.

  • If you notice any unusual behavior or problems after installing your new battery, you may need to reset your MacBook's SMC.

Pendant la manipulation de la batterie, évitez de serrer ou de toucher les six cellules exposées en polymères.

Soulevez la batterie par les bords près de la carte mère puis retirez la du boîtier supérieur.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.