주요 콘텐츠로 건너뛰기

Reemplazo de las patas del Logitech G Pro X Superlight

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

영어
스페인어
3 단계
Logitech G Pro X Superlight Feet Replacement: 0 단계, 이미지 3개 중 1개 Logitech G Pro X Superlight Feet Replacement: 0 단계, 이미지 3개 중 2개 Logitech G Pro X Superlight Feet Replacement: 0 단계, 이미지 3개 중 3개
  • The feet have two layers—a rubberized one and an adhesive pad underneath.

  • If you're reusing the feet, be very careful not to separate the two layers or damage the feet.

  • Carefully slide the point of a spudger under the circular foot, making sure it goes under both the foot and its adhesive pad.

  • The foot recesses have a small notch that makes it easier to slide your spudger under.

  • Gently slide the spudger farther under the foot and lift until you can grab it with your fingers.

Las patas tienen dos capas: una de goma y una almohadilla adhesiva debajo.

Si vas a reutilizar las patas, ten mucho cuidado de no separar las dos capas ni dañar las patas.

Desliza con cuidado la punta de un spudger bajo el pie circular, asegurándote de que pasa tanto por debajo del pie como de su almohadilla adhesiva.

Los huecos de la pata tienen una pequeña muesca que facilita el deslizamiento del spudger por debajo.

Desliza suavemente el spudger por debajo de la pata y levántalo hasta que puedas agarrarlo con los dedos.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.