주요 콘텐츠로 건너뛰기

Logitech G Pro X Superlight 피트 교체

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 3 안내서에 영향을 미칩니다.

6 단계 번역중

6 단계
Logitech G Pro X Superlight Feet Replacement, Reassembly information: 0 단계, 이미지 3개 중 1개 Logitech G Pro X Superlight Feet Replacement, Reassembly information: 0 단계, 이미지 3개 중 2개 Logitech G Pro X Superlight Feet Replacement, Reassembly information: 0 단계, 이미지 3개 중 3개
Reassembly information
  • To install a new foot:

  • If any of the feet got damaged during removal or separated from their adhesive pads, replace them.

  • Use a spudger to carefully scrape up and remove any remaining adhesive bits.

  • Use isopropyl alcohol and a microfiber cloth to thoroughly clean all adhesive residue from the foot recesses. Allow the surface to completely dry.

  • Remove the feet from their backing and firmly press them into place.

새 피트를 설치하려면:

분리하는 동안 피트가 손상되었거나 접착 패드에서 분리된 경우 교체하세요.

스퍼저를 사용하여 나머지 접착제 비트를 조심히 긁어내어 분리하세요.

이소프로필 알코올과 극세사 천을 사용하여 피 홈에 남아 있는 모든 접착제 잔여물을 깨끗이 청소하세요. 표면이 완전히 마를 때까지 기다리세요.

피트의 백킹을 분리하고 제자리에 단단히 눌러 고정하세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.