주요 콘텐츠로 건너뛰기

Kobo Libra Colour 電源ボタンボードの交換

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

3 단계
Kobo Libra Colour Power Button Board Replacement: 0 단계, 이미지 3개 중 1개 Kobo Libra Colour Power Button Board Replacement: 0 단계, 이미지 3개 중 2개 Kobo Libra Colour Power Button Board Replacement: 0 단계, 이미지 3개 중 3개
  • Use pointed tweezers to peel off the coating around the locking tab and its hinge on the ZIF connector.

  • If the coating becomes too brittle and hard to peel off, reheat the power button board and try again.

  • This is a meticulous process! Failure to remove enough of the coating could damage the locking tab during disconnection, so take your time!

先のとがったピンセットを使って、ZIFコネクターの固定タブとそのヒンジ周辺のコーティングを剥がします。

コーティングがもろくなって剥がしにくくなった場合は、電源ボタン基板を再加熱してやり直してください。

これは入念な作業です!コーティングを十分に剥がさないと、切断時にロック・タブを損傷する可能性があるので、時間をかけて行ってください!

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.