주요 콘텐츠로 건너뛰기

Reemplazo de la placa del botón de encendido del Kobo Libra Colour

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

영어
스페인어
6 단계
Kobo Libra Colour Power Button Board Replacement: 0 단계, 이미지 3개 중 1개 Kobo Libra Colour Power Button Board Replacement: 0 단계, 이미지 3개 중 2개 Kobo Libra Colour Power Button Board Replacement: 0 단계, 이미지 3개 중 3개
  • Use tweezers, or your fingers, to grip the blue pull tab on the interconnect cable.

  • You can also use blunt nose tweezers to get a better grip on the pull tab.

  • Pull the cable away from the ZIF connector slowly and steadily at a level angle to separate the coating and disconnect the cable.

  • If you're having trouble, try rocking the cable side-to-side while pulling, and reheat when necessary.

Utiliza pinzas, o tus dedos, para agarrar la pestaña azul del cable interconector.

También puedes usar pinzas de punta roma para agarrar mejor la pestaña.

Tira del cable alejándolo del conector zócalo ZIF despacio y con firmeza, en ángulo recto, para separar el revestimiento y desconectar el cable.

Si tienes problemas, prueba a balancear el cable de un lado a otro mientras tiras, y vuelve a calentar cuando sea necesario.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.