주요 콘텐츠로 건너뛰기

Kobo Libra Colour 電源ボタンボードの交換

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

9 단계
Kobo Libra Colour Power Button Board Replacement, Disconnect the interconnect cable: 0 단계, 이미지 3개 중 1개 Kobo Libra Colour Power Button Board Replacement, Disconnect the interconnect cable: 0 단계, 이미지 3개 중 2개 Kobo Libra Colour Power Button Board Replacement, Disconnect the interconnect cable: 0 단계, 이미지 3개 중 3개
Disconnect the interconnect cable
  • Use the tip of a spudger to lift up the locking tab on the ZIF connector.

  • Use tweezers, or your fingers, to grip the blue pull tab on the interconnect cable and disconnect it.

  • During reassembly:

  • Inspect the ends of the cable and the ZIF connectors for any remaining coating that could prevent a good connection.

  • Peel off the coating, heating the cable and the ZIF connector when the coating becomes too brittle.

  • It doesn't have to look pretty! You just need to remove enough coating to have the cable sit properly in the connector.

スパッジャーの先端を使って、ZIFコネクタの固定タブを持ち上げます。

ピンセットか指を使って、相互接続ケーブルの青いプルタブをつかみ、外します。

再組み立ての際

ケーブルと ZIFコネクタの端に、接続状態を妨げるコ ーティングが残っていないか点検してください。

コーティングがもろくなりすぎたら、ケーブルとZIFコネクターを加熱しながら、コーティングをはがします。

見た目がきれいである必要はありません!ケーブルがコネクターにきちんと収まるように、十分な量のコーティングを剥がせばよいのです。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.