주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

2 단계
Insert the tip of a spudger under each of the antenna cables near their connectors and pry up to disconnect them from the AirPort board. The three cables are coded with black sleeves of different lengths. During reassembly: Connect the long-sleeved cable to the center socket.
  • Insert the tip of a spudger under each of the antenna cables near their connectors and pry up to disconnect them from the AirPort board.

  • The three cables are coded with black sleeves of different lengths. During reassembly:

  • Connect the long-sleeved cable to the center socket.

  • The short-sleeved cable connects next to the screw.

  • The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.

从AIirPort板上使用撬棒的尖端来从天线线缆连接头附近下方撬起。

三条黑色的线缆长度是不同的,在重组时请注意。

将最长的电缆连接到中心插座。

短的电缆连接在螺丝旁边。

剩下的那个电缆没有护套,并连接在最后一个空插座上,位于风扇旁边。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.