주요 콘텐츠로 건너뛰기

Ausbau der hinteren Abdeckung des IBM ThinkPad T42

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 9개에 영향을 미칩니다.

2 단계 번역중

2 단계
Disassembling IBM ThinkPad T42 Rear Cover, Rear screws: 0 단계, 이미지 1개 중 1개
Rear screws
  • Remove the four Phillips screws located on either side of the rear of the T42 (there are two on each end.)

Entferne die vier Kreuzschlitzschrauben, die hinten am Gerät liegen. Links und rechts hinten am Gerät liegen jeweils 2 Schrauben.

-[title] Rear Screws
-[* black] Remove the four Phillips screws located on either side of the rear of the T42 (there are two on each end.)
+[title] Rear screws
+[* red] Remove the four Phillips screws located on either side of the rear of the T42 (there are two on each end.)

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.