주요 콘텐츠로 건너뛰기

iPhone 6 Logic Board ersetzen

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 4개에 영향을 미칩니다.

5 단계
iPhone 6 Logic Board Replacement: 0 단계, 이미지 3개 중 1개 iPhone 6 Logic Board Replacement: 0 단계, 이미지 3개 중 2개 iPhone 6 Logic Board Replacement: 0 단계, 이미지 3개 중 3개
  • When disconnecting the following connectors, only pry up on the connector, not the socket on the logic board or you risk permanent damage.

  • Use the flat end of a spudger to lift the power button and flash assembly cable connector up off of its socket.

  • Lift the volume control cable connector up out of its socket on the logic board.

Achte beim Lösen der folgenden Kabel darauf, nur an den Steckern und nicht an den Anschlüssen auf dem Logic Board zu hebeln, du könntest sie irreparabel beschädigen.

Löse mit dem flachen Ende eines Spudgers das Kabel der Power Button und Blitz Einheitvon seinem Anschluss.

Löse das Kabel des Lautstärkereglers von seinem Anschluss auf dem Logic Board.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.