주요 콘텐츠로 건너뛰기

Sostituzione scheda logica nell'iPhone 6

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 4개에 영향을 미칩니다.

영어
이탈리아어
15 단계
iPhone 6 Logic Board Replacement: 0 단계, 이미지 1개 중 1개
  • Remove the following screws securing the logic board to the rear case:

  • Two 1.9 mm Phillips screws

  • One 2.3 mm standoff screw

  • Standoff screws are best removed using a standoff screwdriver or bit.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

Rimuovi le seguenti viti che tengono in posizione la scheda logica sul case posteriore:

Due viti a croce Phillips da 1,9 mm

Un distanziale a vite da 2,3 mm

Per rimuovere distanziali a vite l'ideale è usare un cacciavite o una punta specifici per distanziali.

In caso di emergenza, può bastare un piccolo cacciavite a taglio, ma è necessaria un'estrema cautela per evitare che scivolando possa danneggiare i componenti circostanti.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.