주요 콘텐츠로 건너뛰기

Trek 4300 Bicycle Brakes Replacement

3 단계
Trek 4300 Bicycle Brakes Replacement, Replacing New Brake Pad: 0 단계, 이미지 3개 중 1개 Trek 4300 Bicycle Brakes Replacement, Replacing New Brake Pad: 0 단계, 이미지 3개 중 2개 Trek 4300 Bicycle Brakes Replacement, Replacing New Brake Pad: 0 단계, 이미지 3개 중 3개
Replacing New Brake Pad
  • Take your new brake pad and place the two inside washers on the bolt and slide them all the way to the pad. The one closest to the caliper should have one rounded edge that faces away from the caliper surface.

  • Feed the bolt through the elongated hole on the caliper with the brake facing toward the centerline of the bike.

  • Next feed the outside washers onto the bolt. The rounded washer should be placed first with the rounded edge away from the caliper.

  • Finally screw the nut onto the end of the bolt and tighten the nut enough to stay on but still allowing the brake pad to slide up and down in the oval shaped hole in the caliper.

  • Repeat these procedures for both sides.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.