주요 콘텐츠로 건너뛰기

Trek 4300 Bicycle Brakes Replacement

2 단계
Trek 4300 Bicycle Brakes Replacement, Removing the Brake Pads: 0 단계, 이미지 3개 중 1개 Trek 4300 Bicycle Brakes Replacement, Removing the Brake Pads: 0 단계, 이미지 3개 중 2개 Trek 4300 Bicycle Brakes Replacement, Removing the Brake Pads: 0 단계, 이미지 3개 중 3개
Removing the Brake Pads
  • Next, take the nut completely off of the bolt.

  • There are 5 washers per brake pad so be sure not to misplace any.

  • It helps to place the nut and washers in order to make reassembly easier.

  • Remove the three washers in between the nut and caliper. These will be referred to as the outside washers.

  • Next remove the brake pad from the caliper and remove the two washers sitting in between the caliper and the break pad. These will be referred to as the inside washers.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.