MacBook Pro 17" Models A1151 A1212 A1229 and A1261 Lower Case Replacement

영어

한국어

1 단계 번역중

1 단계

Remove the ten silver T6 Torx screws securing the display (five on each side). On the right a 9.6 mm screw secures the display data cable, also on the left the screw closest to the inside is 9.6 mm. The others are 7.8 mm.
Don't forget to replace the hinge end caps when reinstalling the display assembly. The end caps are side specific, so be sure that the posts are facing towards the lower case.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.