주요 콘텐츠로 건너뛰기

Nintendo Wii の基板カバーの交換

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 6개에 영향을 미칩니다.

1 단계 번역중

1 단계
Nintendo Wii Motherboard Cover Replacement: 0 단계, 이미지 1개 중 1개
  • Use a pair of tweezers to lift the fan connector up and out of its socket on the logic board.

  • Be sure your tweezers are clamped down on the fan connector, not the socket on the motherboard.

ピンセットを使って、ファンコネクターを持ち上げて、ロジックボードのソケットから接続を外します。

ピンセットがファンコネクターをしっかり掴んでいるか確認してください。基板上のソケットは掴まないようご注意ください。

-[* black] Use a pair of tweezers to lift the fan connector up and out of its socket on the logic board.
+[* black] Use a pair of [product|IF145-020|tweezers] to lift the fan connector up and out of its socket on the logic board.
[* icon_caution] Be sure your tweezers are clamped down on the fan connector, ***not*** the socket on the motherboard.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.